How to
1. So you press properly
Comprise the Snoozi with the whole hand and use the thumb (possibly also both) to push the opener down. The Snoozi should be in the station. Some strength is required here because the seal has to sit tight so that no moisture does not get into the milk powder.
2. Simply assemble
Put the Easy Mix opener on a solid surface, put the easy mix container over it and press it. Make sure that everything sits correctly so that no moisture can come into the milk powder.
3. The optimal temperature
The heat station shines green when drinking temperature is reached (36 ° C to 40 ° C). In this area it is pleasant to drink for your baby and the milk powder dissolves well. Depending on the filling quantity and space, it can take between 30 minutes and 2 hours for the Snoozi bottle to reach drinking temperature.
About
Multi-column
Drinking temperature
Too cold
Too hot
Temperature is measured
Presented in the evening
- Close the bottle floor with a sealing ring firmly with the bottle body.
- Make the Easy-Mix® container together (it is best to press the cylinder onto the stamp from above) and fill up with up to 8 spoons of milk powder (keep it weird so that the stamp is not in the way).
- Pour in the boiled water. This can come directly from the kettle or have already cooled down.
- Place the prepared Snoozi bottle in the heating station, which recognizes the bottle and automatically starts. For several night feeding, set more Snoozis at hand next to the station.
Prepare at night
- If your baby gets hungry, just press down the opener of the Easy Mix® container. The bottle should be on a firm surface and the best way to use your thumb.
- Shake the side of the wrist until water and milk powder are completely mixed. The Snoozi is ready.
- If you have prepared several Snoozi bottles, just place the next one on the heat station after feeding and you are ready for another round.
Attention important
- Be sure to use that Original Snoozi power supply and cableotherwise the functionality cannot be guaranteed.
- Make sure that the heat station always clean is, otherwise the functionality can be impaired.
- The heat station switches on and off automatically when putting a filled bottle.
- Make sure that the heating station is correctly set up.
⚠️ important ⚠️
- The vacuum cleaners should be replaced every 3-4 weeks for hygenic reasons.
- The additional bottles should be replaced every 3 months for hygenic reasons.
TÜV Süd getestet
2 Jahre Garantie
30 Nächte risikolos testen
Free shipping from € 100
